Technical Resources

Aerospace and Defense Purchase Order Requirements

In order to supply you with the best turnaround possible for your aerospace product, we have outlined a handful of requirements which need to be included…

Read More

Aerospace Prime Approvals

Aerospace Prime Approvals for Wadsworth, OH  

Read More

Annealing

The annealing process involves heating up the material slightly above its austenitizing temperature and then controlled cooling it from there. In annealing, the material can be…

Read More

Continuous Furnace Solution Heat Treat

Continuous roller hearth furnaces are typically designed to process high volume products that require the same process time and temperature. Parts are loaded in containers that…

Read More

Drop Bottom Furnace Solution Heat Treating

Drop bottom furnaces utilize a carriage to set heat treat containers on during the solution process. The carriage is suspended by chains and is hoisted into…

Read More

Ferritic Nitrocarburizing (FNC)

FNC produces a compound layer on the surface of the parts typically .0001”-.0015”. The compound layer is formed by diffusing nitrogen and carbon into the surface…

Read More

Hyperquench Solution Heat Treating

The HyperQuench process is conducted in an electric drop bottom furnace. Aluminum parts are loaded into the HyperQuench racking system and lifted into the furnace hydraulically.…

Read More

Isothermal Anneal

Isothermal anneal is a two-stage process involving austenitizing the material first at preferred temperature and subsequently cooling to and holding at a specific temperature to complete…

Read More

NitroSteel® Complete Resource Guide

Have you been challenged to design a better product? Count on NitroSteel®, the experts in ferritic nitrocarburizing (FNC), for performance that’s vastly superior to chrome plating.…

Download

Nitrosteel® FAQ’s

NitroSteel® products and chrome-plated products utilize the same base metals and would be machined in a similar fashion. The hardened surface wear layer and light shallow…

Download

Normalizing

Normalizing is a type of annealing in which steel is austenitized (heated above a critical temperature), held for a specified time, and then cooled in air.…

Read More

Phosphate and Lube Coating

Phosphates are available in light and heavy versions with a base of zinc, iron or manganese. In addition, there are several types of lubrications available like…

Read More

Pickle and Oil

Stage 1 – Pickling: The purpose of pickling is to remove contaminates from the surface of the steel such as scale, stains, or rust. Sulfuric acid…

Read More

Precision Air Quench

Distortion control and dimensional stability Ability to process thinner walled aluminum castings and stampings Improved mechanical properties; ultimate tensile strength, yield strength, and % elongation Increased…

Read More

Premier Thermal Capabilities by Plant

Premier Thermal provides comprehensive metal treatment solutions for your most challenging products. We treat ferrous and non-ferrous metals, and serve as your expert partner every step…

Read More

Quench And Temper

Quench and Temper process provides strength and toughness throughout the part being processed. It is a two- stage heat treat process that includes hardening and tempering…

Read More

Shot Blasting

Shot blasting is the process in which a blasting media (shot) is used to clean the surface of steel, eliminating old coatings, rust, scale, etc.

Read More

Spheroidize Annealing

Spheroidize annealing produces microstructure of globular carbides in a ferritic matrix. This microstructure is achieved in a few different ways:

Read More

   
scroll-top